How to remove burnt oil from polished jugs...

[Rally]

Well my 05 Chopper has developed a small oil leak (rocker box) on front and back polished jug.
Being how the motor is "hot" the oil has baked on. :angry:

The leak looks worse than it actually is especially when I run the Dog hard.

Any sure ways of removing the oil baked on the polished fins?
Which gasket set is best for the 117" motor w/TP rocker boxes?

Thanks

 

[Moespeeds]

Brake cleaner and scotchbrite will take it off, then polish with some mothers.

 

[POPEYE]

:2thumbs:try 0000 steel wool,don't rub to hard, then polish

 

[firedog19]

goofoff and a toothbrush I have the same issue

 

[RCAdd1ct]

Wow! You people are hard core. She usually uses soap and wateeerrrr, oh wait, never mind......

 

[Five Five]

Easy off oven cleaner is what I would try .... spray on and wipe off

 

[Rally]

Where and who would be a good source for new rocker box gasket set for TP ?

 

[BADOG]

Rocker Box Gasket

I just had to change the gasket.
I spoke with S&S directly and they were very helpful.
Here is the information they E-mailed me.
Spencer Michael mspencer@sscycle.com to me

The Drag part#, DS part number 90-4111.
Page 473 of Drags fatbook

Mike Spencer, S&S® Cycle, Inc, Customer Support Center, 14025 Cty Hwy G, Viola WI. 54664, Direct Line 608-627-0256, Fax 608-627-1488, Email mspencer@sscycle.com, Website www.sscycle.comthe upper corner, or call Mike
:up::up:

 

[spadesluck]

Putting oven cleaner or even brake cleaner is that safe on the metals?

 

[Rally]

I tried brake cleaner on a rag and not much luck.
Then brake cleaner on a scotch brite pad and the baked on oil came off with a little elbo grease.
Oven cleaner if it were to get on the paint could do some damage.