High Beam only

[Rickster]

Just curious and hope it is this simple, Riding was going good until i stopped for gas about half way back from Rally. When i fired it up, the high beam was on, when you try to go to low beam the headlight flickers but will not go to Low Beam. Is this due to Low Beam out on the Headlight? Is it normal for K9 to default to High Beam when the low is out? Hopefully no shorts.

 

[Rickster]

Never mind, saw thread already there where this is normal when low beam goes out.
Thanks

 

[mobsta]

:2thumbs:

 

[Brew]

Yep, you got it...

 

[Rickster]

Yep, replaced bulb, all is Good

 

[xSnakex]

what if you replaced the bulb and it still stays on high beam

 

[BadBrad]

what if you replaced the bulb and it still stays on high beam

Then you must be Polish! Do you know what happens to those who post but never make an intro? The INTRO COP comes out of his cave and hunts you down like the animal you are.

Just trying to save you a little heartache and harrasment. Go to the intro section, post who you are and we'll be glad to help you help yourself.

These bikes have had some problems with the connecter melting. Has yours been replaced? I believe there was a recall, depending on the year.

Show us some pics of your dog, a little about who you are, where you're from, etc. Glad to have you join us.

 

[RubWhore]

Then you must be Polish! Do you know what happens to those who post but never make an intro? The INTRO COP comes out of his cave and hunts you down like the animal you are.

Just trying to save you a little heartache and harrasment. Go to the intro section, post who you are and we'll be glad to help you help yourself.

These bikes have had some problems with the connecter melting. Has yours been replaced? I believe there was a recall, depending on the year.

Show us some pics of your dog, a little about who you are, where you're from, etc. Glad to have you join us.

 

[TheDeadOne]

deleted

Request For BDM/BDB Administrative Assistance!

 

[erldawg]

I Know!

I Know!

:willy_nilly: Can I, Can I, Can I PLEASE tell him the answer?

:willy_nilly: Pretty Please!





No INTRO!

Forget It Then! :zzdisappointed:

:roll: :roll: :roll: :roll: :roll: :roll: :roll: :roll: :roll:


dead

Excellent humor Dead !! Thursday Funnies :roll::roll:

 

[BadBrad]

I Know!

I Know!

:willy_nilly: Can I, Can I, Can I PLEASE tell him the answer?

:willy_nilly: Pretty Please!





No INTRO!

Forget It Then! :zzdisappointed:

:roll: :roll: :roll: :roll: :roll: :roll: :roll: :roll: :roll:


dead

Hell, everyone knows that answer. If you replace the bulb and it's still on high, then you push the low beam button to get it to change to low. I'm gonna learn him some elactrical 101.

 

[xSnakex]

sorry

got a little ahead myself..........got the intro down now, so does anybody have an answer to the headlight problem........highbeam only, after changing the bulb and even after pushing the low beam button

 

[drifter]

no one must have answer,i was wanting to know myself

 

[REMorris]

got a little ahead myself..........got the intro down now, so does anybody have an answer to the headlight problem........highbeam only, after changing the bulb and even after pushing the low beam button

the lowbeam part is already burned out. Try another bulb.

 

[Brew]

Just a word of advise, don't handle the bulb (glass) with your bare fingers. The oils from your skin tend to lessen the life of the bulb. Also disconnect the negative cable to the battery when changing it out. This tends to reset everything before starting back up. I changed out my bucket and headlight assembly with no issues. Just saying...:2thumbs:

 

[Rickster]

I did an intro back last year, guess it was destroyed when they had issues, I will repost one.