Heel Toe set up from DLXPRODX

Energy One

Little-Boo

Well-Known Member
Troop Supporter
I got my Forward controls in today from DLXPRODX and they are awesome. Very good quality from what I can see. The chrome is like show room quality and it came with all the hardware including the brake line extension. I will get these babies installed over the weekend and weather permitting I will put some miles on the dog. Once I get them installed I will post some pictures (Close up) for those of you who may be interested in something like this in the future. Here are a few pictures of what came in today.

Carlos :chopper:



IMG_0892.jpg IMG_0893.jpg IMG_0894.jpg IMG_0896.jpg IMG_0896.jpg IMG_0897.jpg IMG_0898.jpg IMG_0899.jpg
 

JR03CHOPPER

Well-Known Member
Those look cool.

Have you had those pegs before? I just wanted to offer a suggestion from personal experience...get some nice rubber caps to go over the spikes when parked in your garage or working on the bike. I have them on the K9 and I swear there is a pound of my flesh hanging from those evil fuckers!!
 

cdogg556

Guru
I got my Forward controls in today from DLXPRODX and they are awesome. Very good quality from what I can see. The chrome is like show room quality and it came with all the hardware including the brake line extension. I will get these babies installed over the weekend and weather permitting I will put some miles on the dog. Once I get them installed I will post some pictures (Close up) for those of you who may be interested in something like this in the future. Here are a few pictures of what came in today.

Carlos :chopper:



View attachment 39160 View attachment 39161 View attachment 39162 View attachment 39163 View attachment 39164 View attachment 39165 View attachment 39166 View attachment 39167
Nice Carlos, can't wait to see them on the bike.:old2:
 

Little-Boo

Well-Known Member
Troop Supporter
Look good my concern would be having enough room for my big fat 12 4E feet.
That would be a concern, however the foot peg is about 3 inches longer than the shift pegs. I would say that is enough to hang your foot while doing the shifting. Once your on the road and done shifting you can always slide you foot in there.

I have them on tomorrow and see how it goes.

Carlos :old2:
 

Little-Boo

Well-Known Member
Troop Supporter
I finally installed my heel toe, forward controls. This was a direct bolt on with a minor mod that I made to the brake peg by adding a 1 inch space so that my knee doesn't hit on the air cleaner. Works great, I can even put my 12 inch boot in there. I had to give up a little space because these bolt on the stock location. I had the 2.5 extended controls, but I may just get some plates made to extend them out to where they were. I am happy cause no more hassle shifting gears for me.

Here are a few pics


IMG_0925.jpg IMG_0924.jpg IMG_0923.jpg IMG_0922.jpg IMG_0921.jpg IMG_0917.jpg IMG_0919.jpg
IMG_0920.jpg


Carlos :chopper:
 

DrRx

2007 Bulldog/2009 K-9
I finally installed my heel toe, forward controls. This was a direct bolt on with a minor mod that I made to the brake peg by adding a 1 inch space so that my knee doesn't hit on the air cleaner. Works great, I can even put my 12 inch boot in there. I had to give up a little space because these bolt on the stock location. I had the 2.5 extended controls, but I may just get some plates made to extend them out to where they were. I am happy cause no more hassle shifting gears for me.

Here are a few pics


View attachment 39294 View attachment 39293 View attachment 39292 View attachment 39291 View attachment 39290 View attachment 39285 View attachment 39287
View attachment 39289


Carlos :chopper:
Hey what kind of pipes you got on that dog?


DrRx- "DOC"
2007 bulldog
 

Th3InfamousI

Administrator
Staff member
I finally installed my heel toe, forward controls. This was a direct bolt on with a minor mod that I made to the brake peg by adding a 1 inch space so that my knee doesn't hit on the air cleaner. Works great, I can even put my 12 inch boot in there. I had to give up a little space because these bolt on the stock location. I had the 2.5 extended controls, but I may just get some plates made to extend them out to where they were. I am happy cause no more hassle shifting gears for me.

Here are a few pics


View attachment 39294 View attachment 39293 View attachment 39292 View attachment 39291 View attachment 39290 View attachment 39285 View attachment 39287
View attachment 39289


Carlos :chopper:
I assume the right side 2.5" extension plate will still work? Just need to fab up a left?

Sent from my 2PS64 using Tapatalk
 

cdogg556

Guru
I finally installed my heel toe, forward controls. This was a direct bolt on with a minor mod that I made to the brake peg by adding a 1 inch space so that my knee doesn't hit on the air cleaner. Works great, I can even put my 12 inch boot in there. I had to give up a little space because these bolt on the stock location. I had the 2.5 extended controls, but I may just get some plates made to extend them out to where they were. I am happy cause no more hassle shifting gears for me.

Here are a few pics


View attachment 39294 View attachment 39293 View attachment 39292 View attachment 39291 View attachment 39290 View attachment 39285 View attachment 39287
View attachment 39289


Carlos :chopper:
Looks great Carlos, I am curious why the 2.5" extension plates didn't work? If you end up not using the 2.5" extensions and would be interested in selling them let me know, I been wanting a set of those for a while now.
 

Little-Boo

Well-Known Member
Troop Supporter
I assume the right side 2.5" extension plate will still work? Just need to fab up a left?

Sent from my 2PS64 using Tapatalk
Ya, that is what I'll be working on next or maybe DLXPRODX will come out with extension plates. If not I can have the left side done locally by a Friend that is a good fabricator.

Carlos :old2:
 
Top