Hazard lights won't turn off and won't start

Riding to work Monday, I got caught in a little rain on the interstate. Suddenly the hazard lights came on and would not shut off. I pulled into a gas station and shut it off. The bike would not start and the hazards were still on and would not shut off. I can tell the run button is not working all the time because switching from run to off, the headlight don't always turn on and off with the switch. The bike will start when run button is pushed and working with a jump wire from the battery to the solenoid. The flashers are still on and tach not working and the "N" flickers. The N flickers in union with the oil light when the bike is off. The Speedo does absolutely nothing at all at any time. 05 ridgeback. Just wondering if anyone has heard of anything like this happening. I checked the ecm plugs and writing under the tank. Seem to be ok.
 

Brew

Troop Supporter
Take a hair dryer to your handle bar controls and dry them out. If need be, you can pull them apart and dry off the PCB's but I'd try the hair dryer first...:D
 

francoblay1

The Spaniard
Yup, what Rob said... also, if you take them apart fill them up with dielectric grease (preventive maintenance) :up:

:cheers:
 
Top