FS: Multiple Big Dog Parts

Energy One
Status
Not open for further replies.
G

Gas Man

Cool isn't cheap
Calendar Participant
First off I'll quote some parts I had for sale before...

Gas Man said:
price includes shipping.

S&S Evo 600 lift valve springs $50


S&S 569 evo cam $55



BDM Shifter linkage 14.5" w/ arm extender...has one small scuff $20



BDM shifter linkage 15.75" $25



BDM air cleaner/backing plate with rear vent plugged (removeable) $30



BDM stock thunderheart ignition with crank sensor $50




Crane Cams coil $100


BDM polished rear axle covers $20




Accutronix external fork stops (new) $20


I also have the stock BDM inner primary, tension shoe, front motor sprocket, chain, and hardware. Make offer on any of these parts... PM me

(no clutch basket or pack or rear sprocket aka just the front sprocket, nut, and chain.)

Click to expand...
Then I'll add a few other pieces

BDM 18" 250mm top in style sissy bar with bdm backrest and luggauge rack, retails at $540. Sissy bar only installed once, never seen the road.

18" sissy bar without rack or backrest Retails $230 Never seen the open road but $175 shipped
Luggauge rack SOLD
backrest SOLD




Sissy bar plug holes. Originally for a k9 so they will drop in perfectly. But had spacers put in so it fits the chopper holes reasonably. Better than the empty holes. $20 SOLD



Teabag 12"T x 10"W x 7"D $40 SOLD


HD chrome freeplay adjustment cover $20 SOLD


S&S high range jet kit...new never opened. Retail $38... $25 SOLD

New Barnett Clutch cable #111-000003-00 Retail $60... $40 SOLD

Please pm me or email me and I will take care of you for the good of a positive transaction.
 
Last edited:
jbk641

jbk641

New Member
Hey..If you do not sell the luggage rack, bags, and fender struts let me know..I will! I have a 05 chopper

Jason
 
G

Gas Man

Cool isn't cheap
Calendar Participant
Jason,
Pending sale on the luggage rack and tea bag.

Still have the 18" drop in sissy bar with backrest.

There are no fender struts. So if you already don't have the rear fender struts to accept the sissy bar you will need that regardless.

Also, can't remember if it was 2005 or 2006 when the struts went from in the back to thru the top for the sissy bar.

Let me know what you want... shoot me a PM
 
G

Gas Man

Cool isn't cheap
Calendar Participant
Adding in a pair of meanstreet handle bar spikes.

I got them for my phoenix build at $65 but ended up not using them and got a different set. Somewhat because they don't match exactly and I'm crazy about details like that.

And for lord knows why, they also don't have set screws.

Anyway... $20 for the set. They will fit over the standard 1/2" allen head bolt. I'll break up the set if you want one for some other bolt like the top motor mount bolt or whatever. But then just $10 each... duh right.



 
G

Gas Man

Cool isn't cheap
Calendar Participant
Got a pic

HD chrome freeplay adjustment cover $20 SOLD
 
Last edited:
G

Gas Man

Cool isn't cheap
Calendar Participant
Adding a few more things from the "scratch n dent" dept and so on

Some pieces from a set of forward controls. Left side body and clevis are rashed Comes with the internal seals, the peg set pins, and bolts. $20



A set of roulette pegs. left side peg near clevis is rashed, one of the toe peg tips is slightly flattened, and there is a little rash on the bottom of the right peg where I hit it in a corner Good enough for some to bolt on or for replacements $20 SOLD




Scratched right tail light housing $10


A set of mirrors with each mirror arm has a small scuff on its end but hardly noticeable $20 SOLD






Stock gas cap $10


Most of that is just to cover shipping and maybe a couple $ for gas money.

A kuryakyn tombstone bag, never used, just sat in the garage, comes with all 3 backrests. Retails $160... $100 shipped Sale pending
Küryakyn

Bag is on p-pad (not the tea bag on the rack)

 
Last edited:
chihuasbigdog

chihuasbigdog

LATINAMERICAN AFFAIRS
A set of mirrors with each mirror arm has a small scuff on its end but hardly noticeable $20




interested in those mirrors. are they available????
 
G

Gas Man

Cool isn't cheap
Calendar Participant
Yep... got your pm


Guys... some people have PM'ed me about parts. Then they don't respond to replies... I think after 2 days of no response and you've been online after my pm... If there is somebody else interested in the part... I don't think its right to drag them thru the mud on it... you will get passed up... I think 2 days is only fair especially when you signed on hrs after I sent the PM...

Am I wrong here? I don't think so....
 
BBChopper

BBChopper

Supports 2 Disabled Vets
Troop Supporter
I have his clutch!
I am holding it for the highest bidder!!!!!:eek:
:roll: :roll: :roll: :roll: :roll:
 
G

Gas Man

Cool isn't cheap
Calendar Participant
UPDATED LIST with what's left.​

S&S Evo 600 lift valve springs $50


S&S 569 evo cam $55



BDM Shifter linkage 14.5" w/ arm extender...has one small scuff $20 SOLD



BDM shifter linkage 15.75" $25



BDM air cleaner/backing plate with rear vent plugged (removeable) $30



BDM stock thunderheart ignition with crank sensor $50




Crane Cams coil $100


BDM polished rear axle covers $20 SOLD




Accutronix external fork stops (new) $20


I also have the stock BDM inner primary, tension shoe, front motor sprocket, chain, and hardware. Make offer on any of these parts... PM me

(no clutch basket or pack or rear sprocket aka just the front sprocket, nut, and chain.)

[/quote]


BDM 18" 250mm top in style sissy bar, only installed once, never seen the road.

18" sissy bar without rack or backrest Retails $230 Never seen the open road but $175 shipped
Luggauge rack SOLD
backrest SOLD




A kuryakyn tombstone bag, never used, just sat in the garage, comes with all 3 backrests. Retails $160... $100 shipped SOLD
Küryakyn

Bag is on p-pad (not the tea bag on the rack)



a pair of meanstreet handle bar spikes.

I got them for my phoenix build at $65 but ended up not using them and got a different set. Somewhat because they don't match exactly and I'm crazy about details like that.

And for lord knows why, they also don't have set screws.

Anyway... $20 for the set. They will fit over the standard 1/2" allen head bolt. I'll break up the set if you want one for some other bolt like the top motor mount bolt or whatever. But then just $10 each... duh right.





Adding a few more things from the "scratch n dent" dept and so on

Some pieces from a set of forward controls. Left side body and clevis are rashed Comes with some random parts such as internal seals, the peg set pins, and bolts. $20



Stock gas cap $10


Most of that is just to cover shipping and maybe a couple $ for gas money.
 
Last edited:
Status
Not open for further replies.
Top