Foot Peg Alternative - Kuryakyn

FXDWG

Member
For those of you who may be looking for an alternative to the standard (expensive) Big Dog foot pegs, I have a couple sets of the Kuryakyn Big Dog peg adapters. The adapters allow several styles of the Kuryakyn foot pegs to be mounted to the Big Dog clevices. It gives you a little bit of freedom from being held to the few styles of pegs available for Big Dogs. The adapters are new with hardware and instructions, and will be shipped without the packaging to optimize shipping cost. They have not been in production for quite a few years now. $40 / set plus shipping.

If interested please just send a private message.

Thx.
 

Attachments

Last edited:

Jersey Big Mike

100K mile club
Are they any current Kuryakyn pegs that they fit? Last time I looked I had found a set of adapters but no pegs r at least none that I liked -- can't remember exactly as off market for quite a while.
Not trying tobursddt your bubble cause of there are pegs avail I might still be interested in going that route myself on one of the K-9's
 

FXDWG

Member
Are they any current Kuryakyn pegs that they fit? Last time I looked I had found a set of adapters but no pegs r at least none that I liked -- can't remember exactly as off market for quite a while.
Not trying tobursddt your bubble cause of there are pegs avail I might still be interested in going that route myself on one of the K-9's
Yes, any of the current pegs that are designed for the TAPERED MALE ADAPTER fit these adapters, but if they are something you didn't like it's a different topic. They will not fit pegs designed for SPLINED adapters. Any of the ISO Peg series, Dually, Iso Wing, Switchblade, Zombie, Pilot, Kinetic work with these adapters. Attached is a photo of one of the current ISO pegs with this adapter.

20240331_235324.jpg
 
Last edited:

Jersey Big Mike

100K mile club
Yes, any of the current pegs that are designed for the TAPERED MALE ADAPTER fit these adaptors, but if they are something you didn't like it's a different topic. They WILL NOT fit pegs designed for SPLINED adaptors. Any of the ISO Peg series, Switchblade, Zombie, Pilot, Kinetic work with these adaptors. Attached is a photo of one of the current ISO pegs with this adapter.

View attachment 123278
Good to know.
 

kennyb

New Member
For those of you who may be looking for an alternative to the standard (expensive) Big Dog foot pegs, I have a couple sets of the Kuryakyn Big Dog peg adapters. The adapters allow several styles of the Kuryakyn foot pegs to be mounted to the Big Dog clevices. It gives you a little bit of freedom from being held to the few styles of pegs available for Big Dogs. The adapters are new with hardware and instructions, and will be shipped without the packaging to optimize shipping cost. They have not been in production for quite a few years now. $40 / set plus shipping.

If interested please just send a private message.

Thx.
you still got these adapters for sale?
 

JDubbUSMC

New Member
For those of you who may be looking for an alternative to the standard (expensive) Big Dog foot pegs, I have a couple sets of the Kuryakyn Big Dog peg adapters. The adapters allow several styles of the Kuryakyn foot pegs to be mounted to the Big Dog clevices. It gives you a little bit of freedom from being held to the few styles of pegs available for Big Dogs. The adapters are new with hardware and instructions, and will be shipped without the packaging to optimize shipping cost. They have not been in production for quite a few years now. $40 / set plus shipping.

If interested please just send a private message.

Thx.
Do you still have these adapters available? If so, I really need one set asap. jdubbusmc@proton.me
 
Top