Ehc gone

[firedog19]

Ehc is gone replaced with the pdm for 04s.

 

[awg]

Well ... how did the install go?

 

[firedog19]

Only one issue with the plug for the speedo as the harness had 2green wires for that plug. One is the neutral light and the other is the tach signal. Had to do a continuity check to determine which one was which

 

[freewood]

:up:Good for you...go da ridgees

 

[roadwarrior]

Had my ehc replaced with a big dog pdm retrofit kit on a 2009 k9 and now been told tachometer needs to be replaced?

Tachometer will not work now that ignition module was removed and was told crank position sensor will no longer be used. I had a Daytona twin tech ignition installed a year ago

Any help would be appreciated

Thanks

 

[graysonkatz]

x2

 

[NZBigDog]

What have you done with the old EHC??
Don't throw it away, send them to me

 

[firedog19]

Curtis has it

 

[bearman]

......2009 k9 and now been told tachometer needs to be replaced?....Tachometer will not work now ....... I had a Daytona twin tech ignition installed a year ago

Any help would be appreciated

Thanks

Don’t know why you would need to replace the tach. Just hook it up to the new ignition.

In the installation instructions I looked up online, the Datona twin tech ignition should have a brown wire for the connection to a tach, if you are still using the stock type single fire coil configuration.