EFI fuel treatment

[08mastiff]

Just wondering out there for those who have EFI models if anyone uses a fuel injector cleaner additive from time to time like you would put in your cars. Also is there any other additive suggested to put in the fuel tanks to help with carbon build up in the engines. Even though I use high octane fuel I have pinging in the motor between 2500-3000 rpm. Any suggestions with that too? Really don't want to experiment until I get some feedback. Thanks in advance.

John

 

[Iman]

Amsoil quick shot might help. Good stuff

 

[erldawg]

I have not used any type of cleaner in the bike. I would use the highest octane fuel I could find.

 

[awg]

How about Sea Foam?

 

[BigDogBro1]

I store my bike with Seafoam run through it and in the tank over the winter. It works best in the outboard engine for storages and cleanouts in the spring as well.

Just went on a 100+ mile run this weekend without any problems. Ran the old fuel through and filled up with premium. I always use 94 octane or higher, usually Sunoco when avaiable. Have never added any other cleaner.

 

[Nukeranger]

How about Sea Foam?

:2thumbs:x2

 

[chili08k9]

Sea Foam in everything for me>>>>>>