Dual tube Oil Cooler Chrome

[emcclary]

I have a used Chromed dual tube Oil Cooler setup which can be seen in the picture below. It includes the adapter plate, brackets, crome tubes, 3 stainless steel braided lines and thermostat control to bypass it until the oil gets warm. I paid $926.81 for the parts only. If you are interested I will let it go for $400 it should fit any big dog frames that have the same diameter downtube as the K9. A larger photo is in the gallery if interested as well

 

[BadBrad]

I have a used Chromed dual tube Oil Cooler setup which can be seen in the picture below. It includes the adapter plate, brackets, crome tubes, 3 stainless steel braided lines and thermostat control to bypass it until the oil gets warm. I paid $926.81 for the parts only. If you are interested I will let it go for $400 it should fit any big dog frames that have the same diameter downtube as the K9. A larger photo is in the gallery if interested as well

I can't help but wonder, why are you selling it?
Also, what is the thermostat set for?

 

[Eric]

wow $926.81 it really must cool the oil well,, hope you sell it

 

[mcgroom]

wow $926.81 it really must cool the oil well,, hope you sell it

Eric,

He put $926 into it originally.

He is only asking $400 for it now.

 

[emcclary]

Scratch that $300.00 the clamps for the down tube have some chrome peeling off so you would have to redo them plus there are a few scratches minor but there.

The reason I am selling it is because my K9 was recently totalled by my insurance company after an accident with a cager. I have been selling of all the parts I had left or removed before the salvage company took the bike. Everything else except this and the seat have been sold already. The thermostat is there so the oil bypasses the oil cooler until the oil heats up when you ride in the fall/winter you dont want the oil going thru the cooler unless necessary. A lot of people dont think they are necessary at all its a personal decision but it looks a lot better than the big dog setup with a single fat tube and no bypass setup. Price breakdown was as follows on dealer invoice.

Dual Tube Oil Coolers with frame clamps $450.00
Stainless Steel Hose Right JAGG Adpt $97.79
Stainless Steel Hose Left JAGG Adpt $112.53
Stainless Steel Hose Top Crossover $76.54
Oil Cooler adapter EVO BT $189.95

 

[dingo]

PM sent

 

[Raywood]

I have a used Chromed dual tube Oil Cooler setup which can be seen in the picture below. It includes the adapter plate, brackets, crome tubes, 3 stainless steel braided lines and thermostat control to bypass it until the oil gets warm. I paid $926.81 for the parts only. If you are interested I will let it go for $400 it should fit any big dog frames that have the same diameter downtube as the K9. A larger photo is in the gallery if interested as well

The guy that was the sales manager at the dealer in San Diego had this style cooler but mounted under the frame hidden away and I thought they were pretty nice setup.

 

[emcclary]

They were made by JC at the now defunct Chrome and Custom in Fairfield NJ. I dont know how much they helped except for adding some oil to the engine but they cant hurt at highway speeds either. I though they looked way better than the BD setup with the fat single tube with two hose coming out of the bottom. Make me an offer if the price is too rich for anyone. Its the last part I have left from the K9 everything else has been sold

 

[Mach_1]

If you haven't sold the oil cooler setup yet I am interested and sent you a PM.