Custom Exhaust

[1sikdog]

......swapping the exhaust on a 2005 Mastiff for a custom stainless 2 into 1 and looking for some feedback; I hope the pix post ok, just trying to get opinions while theyre still just tacked together and not welded- thanks in advance

 

[claw]

I like it! Good job!

 

[Five Five]

nice work... what are you trying to achieve ?
1) performance
2) looks
3) sound

 

[1sikdog]

looking mostly for performance and a different look; kinda crossing my fingers on the sound.....

 

[Bowhunter]

Nice work ya got there, but I would be very concerned about that pipe dragging in right hand turns. I grind the foot pegs and the tips of my V&H Big Radius on right hand turns and they don't appear to be as low as your pipe. If it is for racing in a straight line, then all is good!

 

[Th3InfamousI]

They look bad ass!!

I would just be cautious regarding their height looks like you are 1" or more below the frame. You might be dragging these guys around right turns.

 

[Tom Chop]

Good Fit-Up

:flag: 1sikdog the fit of your work looks good, but I`m with Bowhunter; what are you looking for. I also have a set of BR`s on an `06 K-9 and they dragged when taking hard right turns. V&H after that, I heard, modified the BR`s for more ground clearance. IMHO if you are going to ride the bike on the street I`d have more clearance. Just sayin`. The call is up to you. :2thumbs: :choppersmiley: Tom Chop

 

[PA Chopper]

Watch you don't melt your clutch cable. Got to tie it back.

 

[Billy the kid]

I like it, looks good:2thumbs:

 

[Brew]

Looks great, gonna have to post a sound clip when you crank it up. I'm also with the others, be careful on the right turns...:2thumbs:

 

[1sikdog]

thanks for all the replies - I too had concerns on the clearance but wanted a low look; you guys may have swayed me to raise them up a bit. Also, thanks for noticing the clutch cable; I couldnt see the forest for the trees on that one