Brake light doesnt work on front brake

[glennpg]

My tail light will not come on with the front Brake Where shoud I start looking for the problem.

 

[erldawg]

My tail light will not come on with the front Brake Where shoud I start looking for the problem.

Pull the right hand control. Check wires....There is a wire that comes from the lever and plugs into the control board.....

 

[glennpg]

Thanks, I checked switch on handle bars and I found that the magnet in the lever was broken. I am going to try to order just the magnet. any tips on removing the front brake lever?????

 

[Tattooedirish1]

Not to Hijack the thread but I dont have brake lights at all. 2003 chopper. Replaced the rear switch in the master cylinder, I have turns and running lights, but no front or rear brake lights

 

[H3is3m2n]

I had the same problem, replaced the switch and lights still dont work. I wonder how far you need to put the switch downm the hole?

If anyone knows, please help.

 

[BigDogBro1]

I know this sensor specification doesn't mention it but on other magnetically operated reed switches the rotational orientation of the reed switch to the magnetic field sometimes makes a difference in activation.

 

[graysonkatz]

Had to replace the led light board

 

[H3is3m2n]

Soldered my wires directly to board, now the brake lights work