1BADK9
Limited Edition Member
July 12, 2007
RMD Billet Offers Aftermarket Parts for Big Dog™ Motorcycles
Written by Train under Custom Motorcycles | No comments yet Advertise Here
This might be of interest to those readers owning Big Dog Motorcycles. Thanks to Ken Conte of Rise Above Consulting for always providing us with such great news and press releases.
>>>>>>>>>>>>>>>>>>>>>>>
(Check out this pic. It’s a little large but well worth the load time.)
JASPER, MINN – July 11, 2007 – Good things come in threes. RMD Billet’s new Big Dog™ three-inch open belt drive and their three-piece wheels are exactly what it takes to change a stock Big Dog™ motorcycle into a unique world-class custom bike.
RMD Billet is excited to reveal their sleek Big Dog™ three-inch open belt drive. Replace that old, plain, enclosed primary drive with this billet machined, right-side inner primary drive. It is fully radiused and machined with a unique geometry for a super clean, smooth look! The three-inch open belt drive also features a Bandit clutch, hidden jackshaft and ring gear system. Now available for the 2005 and newer Big Dog™ models, this belt drive also fits the pre-2005 Big Dog™ models. The ready-for-install system includes billet pulley covers, center plate and an inner primary spacer as well as a full pulley/clutch. Machined from aircraft-strength billet 6061 aluminum, this belt drive will be with you for the long haul. Available in polished or chrome finish. Custom engraving on pulley covers is available too.
RMD Billet has other aftermarket parts available for Big Dog™ motorcycles as well. Their exclusive three-piece wheels fit Big Dog™ motorcycles, and with several wheel designs and sizes available, the custom look can easily become a reality. Hubs are machined from 6061 billet aluminum and the wheels come assembled with sealed bearings and bearing spacers installed. Mixing and matching components is possible with only a few slight modifications to the stock pulley and rotors. Available in polished, polished center/powder coat, or chrome centers/powder coat finishes, these three-piece wheels are perfect for any one-of-a-kind bike. Custom one-off wheel designs are also available per request and can make any design dream come to life.
Why follow the pack of Big Dogs when you can lead them with a RMD Billet three-inch belt drive and a set of RMD Billet three-piece wheels?
RMD Billet is a family-owned shop located in southwest Minnesota. RMD Billet products have been featured on bikes in national magazines such as Easyriders, Hot Bike, V-Twin, Hotrod Bikeworks, and Street Chopper. The staff at RMD Billet is friendly and concentrates on quality and unique products for those who want something other than the norm. You can visit them on the web at RMD Billet or by phone at 507-348-8877. They are located at 212 3rd Street, Jasper, MN 56144
RMD Billet Offers Aftermarket Parts for Big Dog™ Motorcycles
Written by Train under Custom Motorcycles | No comments yet Advertise Here
This might be of interest to those readers owning Big Dog Motorcycles. Thanks to Ken Conte of Rise Above Consulting for always providing us with such great news and press releases.
>>>>>>>>>>>>>>>>>>>>>>>
(Check out this pic. It’s a little large but well worth the load time.)
JASPER, MINN – July 11, 2007 – Good things come in threes. RMD Billet’s new Big Dog™ three-inch open belt drive and their three-piece wheels are exactly what it takes to change a stock Big Dog™ motorcycle into a unique world-class custom bike.
RMD Billet is excited to reveal their sleek Big Dog™ three-inch open belt drive. Replace that old, plain, enclosed primary drive with this billet machined, right-side inner primary drive. It is fully radiused and machined with a unique geometry for a super clean, smooth look! The three-inch open belt drive also features a Bandit clutch, hidden jackshaft and ring gear system. Now available for the 2005 and newer Big Dog™ models, this belt drive also fits the pre-2005 Big Dog™ models. The ready-for-install system includes billet pulley covers, center plate and an inner primary spacer as well as a full pulley/clutch. Machined from aircraft-strength billet 6061 aluminum, this belt drive will be with you for the long haul. Available in polished or chrome finish. Custom engraving on pulley covers is available too.
RMD Billet has other aftermarket parts available for Big Dog™ motorcycles as well. Their exclusive three-piece wheels fit Big Dog™ motorcycles, and with several wheel designs and sizes available, the custom look can easily become a reality. Hubs are machined from 6061 billet aluminum and the wheels come assembled with sealed bearings and bearing spacers installed. Mixing and matching components is possible with only a few slight modifications to the stock pulley and rotors. Available in polished, polished center/powder coat, or chrome centers/powder coat finishes, these three-piece wheels are perfect for any one-of-a-kind bike. Custom one-off wheel designs are also available per request and can make any design dream come to life.
Why follow the pack of Big Dogs when you can lead them with a RMD Billet three-inch belt drive and a set of RMD Billet three-piece wheels?
RMD Billet is a family-owned shop located in southwest Minnesota. RMD Billet products have been featured on bikes in national magazines such as Easyriders, Hot Bike, V-Twin, Hotrod Bikeworks, and Street Chopper. The staff at RMD Billet is friendly and concentrates on quality and unique products for those who want something other than the norm. You can visit them on the web at RMD Billet or by phone at 507-348-8877. They are located at 212 3rd Street, Jasper, MN 56144
