2007 Bulldog efi

[ksbowhunter]

I am looking for the oring that goes on the fuel pump plate. Does anyone know where to find one?
Thanks.

 

[pknowles]

Take it to Napa and have it matched up.

 

[Jwooky]

This is more of a seal, like the primary, than an Oring. Don think you will find it at Napa.

Might try BDpartsking. either way post up if you locate one.

 

[ksbowhunter]

Thanks guys, I wish I would have bought a few for this project before bigdog went out.

 

[ksbowhunter]

I contacted Curtis at WSW and he has a few, not sure how many he now has left.

 

[pknowles]

I contacted Curtis at WSW and he has a few, not sure how many he now has left.

Doesn't Walbro make the pump/filter. Groundpounder had some info on this also BigDogBro1. Check them out.

 

[Jwooky]

Yes but this is not for the pump, it's the backing plate that mounts to the tank. They are tank specific.

 

[BigDogBro1]

Are you talking about the tank access cover O-ring?


Perhaps a source could be found here:

http://www.mcmaster.com/#o-rings/=wqf76e
McMaster-Carr

 

[ksbowhunter]

Yep that is the one, I already got one from WSW.