2003 Bulldog issue

[RandyJ1972]

Hey everyone. So im new to Big Dogs and my bike i bought 2 weeks ago. Last week my Battery died. I charged it to 100% and started driving it again. Last night the battery died again. I found a loose wire connection... I traced it back to 1 of 2 locations. One goes to the bottom of the right cover. And the other goes to a chrome box on the front of the bike. Im not sure what is what. There was an electronic ignition installed by a previous owner. I will attach some pics. The connector almost looks as if it connects to the inside frame near the battery. Its a black wire. Thanks in advance. Also is there a PDF of the wiring?

 

[Mr. Wright]

Hey everyone. So im new to Big Dogs and my bike i bought 2 weeks ago. Last week my Battery died. I charged it to 100% and started driving it again. Last night the battery died again. I found a loose wire connection... I traced it back to 1 of 2 locations. One goes to the bottom of the right cover. And the other goes to a chrome box on the front of the bike. Im not sure what is what. There was an electronic ignition installed by a previous owner. I will attach some pics. The connector almost looks as if it connects to the inside frame near the battery. Its a black wire. Thanks in advance. Also is there a PDF of the wiring?

Hi Randy, hope that gets you back on the road.

 

[Jersey Big Mike]

The chrome box on the front is the voltage regulator.
Use a volt meter when all is reconnected and make sure that at apprx 3000prm you are getting 13.8 to 14.4 measured at the battery indicating that it is charging. With a Compu-fire, the positive wire also tends to be black so you might want to check output before connecting.