Where can I buy the turn signal visors for a 2007 bulldog. I think Gas has them on his bike..
Turn signal visors
- Thread starter bigdogbro2
- Start date
emcclary
Active Member
They are Harley I have on my bike as well. I think this is the link to the item you can get them in clear smoked or orange lenses.
Browser Update Required
Click the link it works even though it says update required
Browser Update Required
Click the link it works even though it says update required
BigDogBro1
Made in the USA
How are the bezel rings removed and new installed?
I'll end up putin them on!
I want some too Bro2.
I'll end up putin them on!
I want some too Bro2.
Last edited:
See this post
http://www.bigdogbiker.com/forums/show-shine/509-noticed-part-fell-off-2.html#post19832
You can get the rears or fronts. Makes no difference cause we don't use the bulbs (the only difference being the orange or red bulbs). But you can see the part number for the fronts.
YOu don't un-do anything... just a simple flat head screw driver under the stock ones... pop off... push on the lens of the new ones... till they pop on.
http://www.bigdogbiker.com/forums/show-shine/509-noticed-part-fell-off-2.html#post19832
You can get the rears or fronts. Makes no difference cause we don't use the bulbs (the only difference being the orange or red bulbs). But you can see the part number for the fronts.
YOu don't un-do anything... just a simple flat head screw driver under the stock ones... pop off... push on the lens of the new ones... till they pop on.
:2thumbs: Thanks Gas and everybody for the Info......:2thumbs: Going tomarrow to buy some.....
Chopper Dave
SIICK!!!
yep....I got the ones with the smoked lens....
Last edited:
BigDogBro1
Made in the USA
Thanks Gas and House!
Sorry we missed you House for my maiden ride last Saturday out to MIS/Irish Hills.
Thanks for the mech support! I like the looks of the visor signal covers, they blend better with the headlight.
Sorry we missed you House for my maiden ride last Saturday out to MIS/Irish Hills.
Last edited:
Cutter
Well-Known Member
I saw your bike at ACM last week, I was making some stuff for the Athena that they had back there.
The paint is incredible, 10X better than it looks in the pics...
You aint kidding about "fully" chromed either...
:2thumbs:
YA HOUSE, YOU HAVE TO TURN THE OTHERWAY NEXT TIME....:up: HE HE.....LOOKING FORWARD RIDING W/ YOU. HAD A GREAT TIME W/ SEAT LAST WEEKEND.....:2thumbs: BRO2
CUTTER, SAME W/ YOU CANT WAIT TO GET EVERYONE TOGETHER FOR A RIDE.....:2thumbs:
:bang: :argue: but I still had a few and it was great to finally ride looking forward to the bulldog convention:lol:
and it was great to finally ride looking forward to the bulldog convention:lol:
BigDogBro1
Made in the USA
Thanks! Cutter
I was as nervous as a guy on his first blind date, the first time I saw the paint job - GOD I hope she's perrrty. My avatar is the Pergatory paint I saw in Scottsdale AZ. on a K9. I'll update it to my paint job soon.
BigDogBro1
Made in the USA
They don't fit!
Bro2 bought a set from American HD in A2 and the lens lock tangs are too short by an 1/8" or so. They won't clip on his 2007 Bulldog signals, front or rears.
What gives? do the HD covers not fit like the BDM ones do and everyone just hacks them on?
Thanks!
UPDATE: 4/28/09
The smoked lens just needed to pushed back into the chrome bezel a bit further.
Hey Gas - the HD lens visors everyone says fits - won't. Per Bro2.
Bro2 bought a set from American HD in A2 and the lens lock tangs are too short by an 1/8" or so. They won't clip on his 2007 Bulldog signals, front or rears.
What gives? do the HD covers not fit like the BDM ones do and everyone just hacks them on?
Thanks!
UPDATE: 4/28/09
The smoked lens just needed to pushed back into the chrome bezel a bit further.
Last edited:
Cutter
Well-Known Member
Push the lens, not the trim ring and you will be good to go :2thumbs:
BigDogBro1
Made in the USA
You push it - Push it good!
Hey thanks Cutter I'll have Bro2 pushit - I'm laughin so hard I can't type!
Last edited:
You mean they look like this?
Just push on the clear plastic part - it slides inside the "chrome ring," and suddenly the whole tab is sticking out, just as long as the stock BDM ones.
