Starter button ?

[Reddickracing]

Im cleaning and inspecting inside the starter button housing (not making good contact when I press the on or starter button don't know which one) any way I see one small Phillips head that holds the green circuit board in and 3 other round ?s do these screw in or pull out? Somethings not makin good contact and want to remove circuit board and have a look. I have to press both buttons several times until I find the right spot.

 

[Reddickracing]

I have already cleaned starter contacts and installed a slam button. Comp releases working good. Did notice the white wire connector that plugs in to circuit board is in 2 pieces, maybe ones is a lock idk

 

[MossBerg590]

Should be 3 or 4 little screws, your button is probably worn. You can try and add a small piece of electrical tape or a small rubber piece to the behind the start button to make better contact.

 

[MossBerg590]

As far as the white connectors, the wide one is for the controls, the small one is for the front brake

 

[Reddickracing]

Just put a test light on the green starter wire and its def the ON button after pressing ON several times and hard the starter lights up everytime I press it