04 Chopper Rear Rotor

Energy One

Fat_Bastard

Active Member
hmmm...
much different than my 04 Chopper rotor,
I had Curtis (Wild Steed) get a front rotor, mad clown style, machine the center hole larger to fit the rear and it worked ok.
There was some break in pulsation for the first 800 miles and then it went away; but I think it was from a burr on manufacturers drilled air vent holes on the rotor not from the hole he machined.
 
Last edited:

halvyt

New Member
I’d really hate to have to get a whole new rotor assembly since they match my rims. Those set screws do look like they can be removed.
 

pknowles

semi-retired...---... GURU C7Z06...---...
Lifetime Supporting Member
Supporting Member
I’d really hate to have to get a whole new rotor assembly since they match my rims. Those set screws do look like they can be removed.
Call jp cycles and give them the two dimensions you need. I'm sure they have something that will work
 

pknowles

semi-retired...---... GURU C7Z06...---...
Lifetime Supporting Member
Supporting Member
You will need the exact o.d. and bore in order to get match.
Some stock harley rotors may work. Uou should pull it to measure
.also need the thickness to match.
 

Mr. Wright

Guru
Lifetime Supporting Member
Supporting Member
The one you saw on eBay won't work. You will probably have to get it from Performance Machine, if Donna doesn't have one.
 
Top