Dog getting no spark
- Thread starter Diehard87
- Start date
He has an 04 Bulldog,
Yeah, I'd start with the cam sensor, then check power both in and out of the ignition module. More than once, I've found a broke wire in a plug at the ignition module.
Yeah, I'd start with the cam sensor, then check power both in and out of the ignition module. More than once, I've found a broke wire in a plug at the ignition module.
It's a 04 bulldog with 107 S&S motor I replaced my ehc in 2017 with the one from Alex
U mean axle?....if so thats a good system...like Awg Mr wright and myself said its probably a short near the cam sensor or the cam sensor itself... if its a cam sensor they r only like 60 bucks on ebay....late 70 and early 80s cam sensor will fit it just have to wire it up....3 wires....red black and green....simple simple job if thats the case and i hope it is....keep us posted we all try to help you if we can
Chances are it's not the ehc if you have axles and you just replaced it.
If the shop says otherwise I'd load your bike up and take it elsewhere or bring it home and if your willing to work and can run a volt meter plenty of us can help. They aren't willing to even try to narrow it down.
Good luck!
Sent from my 2PS64 using Tapatalk
If the shop says otherwise I'd load your bike up and take it elsewhere or bring it home and if your willing to work and can run a volt meter plenty of us can help. They aren't willing to even try to narrow it down.
Good luck!
Sent from my 2PS64 using Tapatalk
Can you send the link to which one I need to be looking for.
They make a spa1 spa2 spa3....i dont know what the differnece is in these they look the same...figuring they r upgraded version is the reason for the different number....but have them to do the testing first.....im with Th3infamous i dont think ur axle kit is giving u trouble unless there is a short in something....test the bike we will see what is wrong...
Ok will ask abt this today. Thanks
No problem thats what we are all on here for
pauldeepsea
Guru
I would get my bike away from the shop right now !
You have axels kit and they immediately go directly to that and say it’s bad means they have not troubleshot shit, and could end up replacing all kinds of shit that isn’t bad.
Just my 2 pennies
Rottweiler
Well-Known Member
I agree you ehc is probably good.
I have a 2004 and had to replace the ignition module right hand side, lower round cover.
Sent from my Life One X3 using Tapatalk
I have a 2004 and had to replace the ignition module right hand side, lower round cover.
Sent from my Life One X3 using Tapatalk
Ok where did you order it from.
Rottweiler
Well-Known Member
Rottweiler
Well-Known Member
I will try and look it up when I get home.
Sent from my Life One X3 using Tapatalk
Sent from my Life One X3 using Tapatalk
Rottweiler
Well-Known Member
Something like this.
Sent from my Life One X3 using Tapatalk
Ultima Single Fire Electronic Ignition Module Harley Big Twin Sportster 70-99 for sale online | eBay
Find many great new & used options and get the best deals for Ultima Single Fire Electronic Ignition Module Harley Big Twin Sportster 70-99 at the best online prices at eBay! Free shipping for many products!
www.ebay.com
Sent from my Life One X3 using Tapatalk
Ok thanks
The ignition modules for the 02 through 04, duel fire are very hard to find now. Two things you can do. You can get with Thunderheart and get a single fire set up for an Indian. It will come as a kit, coil and everything. Or you can go with the Ultima unit, that will fit in your nose cone. Both will work just fine.