Separate names with a comma.
Wanting to join the rest of our members? Feel free to sign up today.
Discussion in 'Wild Steed Worx & Services' started by Derek1974, Nov 8, 2016.
Any ideas where to get a new one?
Are you talking about the anuciator? Shows turning signals, high beam etc?
I am not sure if www.wildsteedworx.com
Sell them. May want to try shovelheadkicker ? Forumn member on here Derrick. He sells all kind of big dog parts
Thanks. Im looking for the plastic piece that it mounts into that runs the center length of the tank. Mine is cracking at the end near the seat.
I think Derek & Donna have them. @bigdogpartsking
Thanks! I'll check it out. Greatly appreciated.
Sometimes they post them on ebay.
If by chance they don't have one, try ur local favorite body shop. Some new 'glass and they may be able to save urs?
Really glad I joined this sight. Great people!
Flattery will get ya everywhere---- Maybe try J B Weld?? Surprising what ya can fix with that stuff!!
One other piece of free advise, Don't tighten that rear bolt too much. You can see it start to get distorted and that helps cause the cracking !! I just run mine down till it doesn't slip back and forth easily, You'll see it start to deform pretty quick.
It's called a dashboard. I fixed mine with Hysol 9462 epoxy and carbon fiber cloth. Worked great and has held up after 4 years.
Misquoted wrong forumn member , meant bigdogpartsking
Also make sure you have a washer on the bolt that tightens the plastic down