Milco
The Flying Dutchman
Is this one really plug and play for a K9?
https://www.amazon.com/dp/B018LXCV4U/ref=cm_sw_r_cp_apa_Pd0MAbC2992FX
https://www.amazon.com/dp/B018LXCV4U/ref=cm_sw_r_cp_apa_Pd0MAbC2992FX
Daymaker
- Thread starter Milco
- Start date
That one is the one and there's also a chrome one without the black backing which I think looks better
Sent from my 2PS64 using Tapatalk
Mike manson
Well-Known Member
Will they plug and play on ridgeback
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
It's got the same exact light output/Lumens (4000) so it's got the same brightness as the sunpie. It actually doesn't list it's lowbeam on the website.
http://www.lamonstergarage.com/lamo...light-for-f3-st-parts-accessories-motorcycle/
The light pattern on the daymaker probably makes it seem less but it's the same.
Sent from my 2PS64 using Tapatalk
Milco
The Flying Dutchman
https://www.amazon.com/gp/product/B...f6b-5f5f-b4b8-9e55854fb467&pf_rd_i=8323665011
Is this the chrome one that is plug and play?
Yes Sir...i have that one in both bikes. One has about 6k miles the other gas 2k both no issues.
Sent from my 2PS64 using Tapatalk
Milco
The Flying Dutchman
Thank you!, and does this also solve the problem with the burned headlight connector?
The OEM plastic connector shouldn't melt as the current is much lower BUT I would still replace it when you got it apart anyways just incase. No reason not to put a ceramic one in the headlight regardless. Who knows once you get it apart it could have been replaced anyways already.
Sent from my 2PS64 using Tapatalk
Milco
The Flying Dutchman
OK thanks again! I will look where I can purchase the ceramic one!
BWG56
Guru
Lamonster LED is
1/2
the wattage, no need for ceramic connector
Element specifications (per element):6063 Aircraft aluminum construction.
6000k color rendering.
4000 lumen.
360 degree light beam angle.
24 watt per bulb.
2.0amp (+/- .2) power draw. Stock halogen is 4.58amp.
H4 connector for full plug and play operation.
Daymaker,
Mirror Lighting Type Headlight
Voltage 12 volts
Wattage 45.00
Thejanitor000
Member
Just ordered my Daymaker as well. $35 on Amazon.
SB03chopper
Active Member
I ordered one today, and will be here Sat.
dentdude36
Banned
Shoulda went halves on the best LED available for our bikes
SB03chopper
Active Member
Go mine today, installed, looks great. Got the 2018 $42 one, chrome, and plug an play setup. Like the pattern instead of a full beam, lays with the land, gives more shoulder lighting.
Thejanitor000
Member
Went out today and now I don't have hi or low beam lights. Waiting for the ceramic connector to come b4 I open it up & install the Daymaker. Hopefully its not a bigger issue. To be continued.....
dentdude36
Banned
Exactly the reason I tell everyone I meet with a big dog to change the bulb right away but they never listen
Thejanitor000
Member
Wish I hadda known. We'll see what's up in a few days.
Thejanitor000
Member
All done. Replaced the plastic connector too with a ceramic one. Wish it wasn't raining......
