how many teeth, spline on the output shaft for the drive pulleyt

Energy One
K

knine08

Member
changing the drive pulley to 32t on 08 K9 baker 6 speed.
they say a harley will fit if you machine the pulley to match the big dog size.
I have seen two spline types on the harley 30 and 33.
want to make sure i get the correct size spline to fit the big dog baker 6 speed
 
francoblay1

francoblay1

The Spaniard
Got it...

Now I want one too!!! Who´s willing to prepare them... no chance for me to get it done in Spain... I will pay for someone to ship it to me. Thanks.

:chopper:
 
cdogg556

cdogg556

Guru
francoblay1 said:
It is not a big deal for you who are living there in the US.... it is a HUGE deal for me!!! so you aint helping much here saying this and showing a couple pics!!! :oldroll: :oldlaugh:
Click to expand...
Well you know that old saying, "you can't make everyone happy" sorry I ain't helping you buddy!;) :)
 
BWG56

BWG56

Guru
pknowles said:
While I have you what is the plate with the 4 holes for?
Click to expand...
Our OEM pulleys don't have that plate, if you look in the pic I posted, the 2 SHCS's go into the appropriate holes by the flats on the nut to do the same as the plate. problem is if the pulley splines stretch the nut will wear a flat on the SHCS and to remove it you have to cut the heads of the SHCS. :yesnod: See's what I means? What else can I do for ya, make a pulley for ya old school with a hammer an chisel:oldhardlaugh:

IMG_0199.jpg
 
You must log in or register to reply here.
Top