NEED YOUR IMPUT ON SISSY BAR KIT

mastiff1 · 09-16-2010, 08:57 PM

Hi,

I own a 2006 BIG DOG MASTIFF.

I have been looking to buy struts & sissy bar for my bike.

I contacted BDM and they quoted me around $700.00 for the struts & sissy bar kit. They didnt have it in stock so i have to wait until they pile up a least 25 orders to manufacture them. I didnt want to wait for that long.

While doing my research, i came across somebody selling a kit.
He sent me pictures and they looked great. He was asking $425.00 which seemed really cheap. So i bought them.

Only problem was that he didnt know the model/year of the bike and couldnt specify if they fit my bike. He clarified that it will fit my 250 rear tire. So i took the risk and purchased them anyways.

I got them today and noticed that the struts do not fit my bike and they dont have any part # on them.

By looking at the attached picture, could somebody help me figure out the model and year these struts belong to?? If somebody can point me in the right direction, i can sell them on EBAY or somewhere and recover my money.

Thanks for your help.

SAM

RubWhore · 09-16-2010, 09:48 PM

They fit 04 or 03 Bigdog Rolling Thunder chopper frame for sure dont know about the prostreet
you wont have no problem gettin rid of though

mastiff1 · 09-20-2010, 02:51 AM

tHANKS FOR THE INFO!!!

Jigsaw · 09-20-2010, 03:32 AM

I've got the 12" Sissy Bar for 03 & 04 Big Dog Chopper, with the Rolling Thunder frame, and what you have isn't the same. On mine, the Sissy Bar enters from the rear, not from the top. The part number for my kit is BDM220-00025. I'm sorry I can't tell you what model's yours fits. Good luck and hope you find a answer soon!

stlmikie · 09-20-2010, 06:07 PM

is there a part number on any of the stuff?

mastiff1 · 09-25-2010, 01:05 AM

Quote:

Originally Posted by Jigsaw

I've got the 12" Sissy Bar for 03 & 04 Big Dog Chopper, with the Rolling Thunder frame, and what you have isn't the same. On mine, the Sissy Bar enters from the rear, not from the top. The part number for my kit is BDM220-00025. I'm sorry I can't tell you what model's yours fits. Good luck and hope you find a answer soon!

Thanks!

mastiff1 · 09-25-2010, 01:06 AM

Quote:

Originally Posted by stlmikie

is there a part number on any of the stuff?

No on the struts i have to check the sissy bar.
Thanks!

09-20-2010, 03:32 AM	#4 (permalink)
Jigsaw Member Name: Rick Member #: 776 Join Date: Apr 2008 Location: Arlington, TX Posts: 28 My Bike(s): 2004 Big Dog Chopper My Gallery Rep Power: 0	I've got the 12" Sissy Bar for 03 & 04 Big Dog Chopper, with the Rolling Thunder frame, and what you have isn't the same. On mine, the Sissy Bar enters from the rear, not from the top. The part number for my kit is BDM220-00025. I'm sorry I can't tell you what model's yours fits. Good luck and hope you find a answer soon! Last edited by Jigsaw; 09-20-2010 at 03:40 AM.

09-20-2010, 06:07 PM	#5 (permalink)
stlmikie I wish I had more money. Name: Mike Member #: 159 Join Date: Sep 2007 Location: St. Peters Posts: 4,243 My Bike(s): 03 Mastif My Gallery Rep Power: 8	is there a part number on any of the stuff? __________________ If ignorance is bliss then knock the smile off my face!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-20-2010, 02:51 AM	#3 (permalink)
mastiff1 Member Member #: 4898 Join Date: Aug 2010 Posts: 149 My Gallery Rep Power: 3	tHANKS FOR THE INFO!!!