Accutronix

Bigbass · 01-03-2010, 09:14 PM

If a person was going to go through the trouble of switching over to the tribal style Accutronix Tribals what degree rake would I need for a 2006 Mastiff. I don't want to mess up my trail and rake..

Daddycool · 01-03-2010, 10:20 PM

I'd stick with stock rake if you are worried. Accutronix tripple trees dont have provisions for turn signals... just so ya know.

Gas Man · 01-04-2010, 01:24 AM

Be prepared... its not a direct bolt on

Staffy · 01-04-2010, 09:18 PM

BOLT ON - Hey you never know....you might get lucky like little Boo....
Accutronix tripple trees

Little-Boo · 01-05-2010, 03:14 AM

I have the Gothic Trees from Accutronix. The rake you need is 3 degrees which is what BDG told me when I called. I was told my the dude at Accutronics that they were the same width as the wide glide. I did not have to mess with different spacers, everything bolted right on. This change over did not change the trail on my 2006 Mastiff either. However, you will have to either remove the front turn signals or use a different mount, because the Tribal or Gothic trees do not have the holes to mount the turn signals. I used the Headwinds headlight clamp which attach to the headlight mount, worked out great for me.

Carlos

mcgroom · 01-07-2010, 03:52 PM

All set-up on our end.

Let me know if we can help.

Moespeeds · 01-07-2010, 03:57 PM

Just ditch the front signals, but if you gotta have them get a set of 40mm signal clamps and clamp them to the forks. Get them on ebay, Custom chrome, etc. When I went to the inverted front end, I took off the front turn signals with no ill effects, rears still worked as they should.

mcgroom · 01-07-2010, 04:13 PM

Quote:

Originally Posted by Moespeeds

Just ditch the front signals, but if you gotta have them get a set of 40mm signal clamps and clamp them to the forks. Get them on ebay, Custom chrome, etc. When I went to the inverted front end, I took off the front turn signals with no ill effects, rears still worked as they should.

Custom Dynamics has a set of RMD Billet signal clamps that would work as well.

mcgroom · 02-03-2010, 09:01 PM

It looks like we are going to be placing in order with Accutronix this week for a local customer and a forum member.

Pricing on some items were stronger than what I expected.

If anyone is interested in anything before I place the order, feel free to let me know.

Mick

Bigbass · 02-03-2010, 09:07 PM

P.M Sent

give me a call if you would so I can get on board with the order.

mcgroom · 02-04-2010, 05:49 PM

Quote:

Originally Posted by Bigbass

P.M Sent

give me a call if you would so I can get on board with the order.

Ordered!

mcgroom · 02-24-2010, 01:25 AM

These just arrived and I could not help myself but to take a few pics and post them.

The quality on these is fantastic.

Can't wait to see them on your bike Bigbass.

Bigbass · 02-24-2010, 01:39 AM

Holy shit batman. Those are bad as hell. Thank you so much for everything you are amazing to deal with.

mcgroom · 02-24-2010, 01:48 AM

Quote:

Originally Posted by Bigbass

Holy shit batman. Those are bad as hell. Thank you so much for everything you are amazing to deal with.

I am jealous as hell.

My front end is 54mm so I can't get these.

I do have a set being made for me as we speak though.

Mean Streets came though for me.

KnotSo · 02-24-2010, 02:34 AM

Looking forward to reading how the install went.

01-03-2010, 09:14 PM	#1 (permalink)
Bigbass Member Join Date: Sep 2009 Posts: 112 My Bike(s): 2006 Mastiff My Biker Photos Rep Power: 1	Accutronix If a person was going to go through the trouble of switching over to the tribal style Accutronix Tribals what degree rake would I need for a 2006 Mastiff. I don't want to mess up my trail and rake..

01-04-2010, 01:24 AM	#3 (permalink)
Gas Man Cool isn't cheap Join Date: Apr 2007 Location: Metro Detoilet Posts: 14,367 My Biker Photos Rep Power: 15	Be prepared... its not a direct bolt on __________________ ^^My $0.02 not yours^^ -Chris aka Gas Man "Why pay somebody else to fuck up your bike?" "DEATH SMILES AT ALL OF US --- ALL I CAN DO IS SMILE BACK!" -Al Sensoli

01-05-2010, 03:14 AM	#5 (permalink)
Little-Boo Member Name: Carlos Join Date: Nov 2007 Location: McAllen, Texas Posts: 1,452 My Bike(s): 2009 Sporty, 2010 FatBoy, 2006 Mastiff, several Mods to many to list My Biker Photos Rep Power: 3	I have the Gothic Trees from Accutronix. The rake you need is 3 degrees which is what BDG told me when I called. I was told my the dude at Accutronics that they were the same width as the wide glide. I did not have to mess with different spacers, everything bolted right on. This change over did not change the trail on my 2006 Mastiff either. However, you will have to either remove the front turn signals or use a different mount, because the Tribal or Gothic trees do not have the holes to mount the turn signals. I used the Headwinds headlight clamp which attach to the headlight mount, worked out great for me. Carlos __________________ SEMPER FI 1st SGT USMC Retired The Dealiest Weapon in the World is A MARINE AND HIS RIFLE

01-07-2010, 03:52 PM	#6 (permalink)
mcgroom Too Badd Customs, LLC. Name: Mick Join Date: Nov 2007 Location: C-Bus, Ohio Posts: 1,689 My Bike(s): 2002 Big Dog Prosport My Biker Photos Rep Power: 4	All set-up on our end. Let me know if we can help. __________________ Accutronix/Baker/Andrews/Edelbrock/Sealing Solutions/Lyndall/K&P Engineer/Russell Perf/Cometic Gask/Custom Dynamics/Energy One Clutches/Arnott Air/Tech Cycle/Namz

01-07-2010, 03:57 PM	#7 (permalink)
Moespeeds Wrecked! Join Date: Mar 2008 Location: Cherry Hill, NJ Posts: 1,545 My Bike(s): 2004 Big Dog Chopper, 2011? Redneck Monoshock, 2003 Roadstar Midnight, 2000 Roadstar Custom My Biker Photos Rep Power: 4	Just ditch the front signals, but if you gotta have them get a set of 40mm signal clamps and clamp them to the forks. Get them on ebay, Custom chrome, etc. When I went to the inverted front end, I took off the front turn signals with no ill effects, rears still worked as they should. __________________ Moe Colontonio Cherry Hill, NJ My newest project, 330 Monoshock...

01-03-2010, 10:20 PM	#2 (permalink)
Daddycool Member Name: Marc Join Date: Jun 2008 Location: Broken Arrow, Ok. Posts: 530 My Bike(s): 2005 Big dog Chopper My Biker Photos Rep Power: 3	I'd stick with stock rake if you are worried. Accutronix tripple trees dont have provisions for turn signals... just so ya know.

01-04-2010, 09:18 PM	#4 (permalink)
Staffy Member Join Date: Mar 2008 Posts: 583 My Bike(s): K9 - 2007 Limited Edition #46 Something like an '08 Mastiff HD FatBoy '03 Anniversey Edition My Biker Photos Rep Power: 3	BOLT ON - Hey you never know....you might get lucky like little Boo.... Accutronix tripple trees

02-03-2010, 09:01 PM	#9 (permalink)
mcgroom Too Badd Customs, LLC. Name: Mick Join Date: Nov 2007 Location: C-Bus, Ohio Posts: 1,689 My Bike(s): 2002 Big Dog Prosport My Biker Photos Rep Power: 4	It looks like we are going to be placing in order with Accutronix this week for a local customer and a forum member. Pricing on some items were stronger than what I expected. If anyone is interested in anything before I place the order, feel free to let me know. Mick __________________ Accutronix/Baker/Andrews/Edelbrock/Sealing Solutions/Lyndall/K&P Engineer/Russell Perf/Cometic Gask/Custom Dynamics/Energy One Clutches/Arnott Air/Tech Cycle/Namz

02-03-2010, 09:07 PM	#10 (permalink)
Bigbass Member Join Date: Sep 2009 Posts: 112 My Bike(s): 2006 Mastiff My Biker Photos Rep Power: 1	P.M Sent give me a call if you would so I can get on board with the order.

02-24-2010, 01:25 AM	#12 (permalink)
mcgroom Too Badd Customs, LLC. Name: Mick Join Date: Nov 2007 Location: C-Bus, Ohio Posts: 1,689 My Bike(s): 2002 Big Dog Prosport My Biker Photos Rep Power: 4	These just arrived and I could not help myself but to take a few pics and post them. The quality on these is fantastic. Can't wait to see them on your bike Bigbass. __________________ Accutronix/Baker/Andrews/Edelbrock/Sealing Solutions/Lyndall/K&P Engineer/Russell Perf/Cometic Gask/Custom Dynamics/Energy One Clutches/Arnott Air/Tech Cycle/Namz

02-24-2010, 01:39 AM	#13 (permalink)
Bigbass Member Join Date: Sep 2009 Posts: 112 My Bike(s): 2006 Mastiff My Biker Photos Rep Power: 1	Holy shit batman. Those are bad as hell. Thank you so much for everything you are amazing to deal with.

02-24-2010, 02:34 AM	#15 (permalink)
KnotSo Mr. DICK's friend Join Date: Apr 2007 Location: Wetstern Washington State Posts: 6,815 My Bike(s): 2006 Big Dog Mastiff, 2005 Buell, 2000 HD XL1200C, 2 hondas, 1 yamaha, 1 zuki 1395 My Biker Photos Rep Power: 5	Looking forward to reading how the install went. __________________ Livin Hard was easy when I was young and Bulletproof 1.With Respect to a forum, the First post should always be your Introduction. 2. SEARCH for your answers before asking the Forum. 3. State the facts, we will help resolve your bike issue. "What goes on around you... compares little with what goes on inside you." - Ralph Waldo Emerson

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode